IBM DJSA-210 Hard Drive Specifications - Page 133
READ/WRITE DMA QUEUED command supported, Current Advanced Power Management level
View all IBM DJSA-210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 133 highlights
Word 86 87 88 89 90 91 92 Content 00XXH * * 4000H XX1FH XXXXH 0000H 40XXH XXXXH Description Command set/feature enabled 15- 8(=0) Reserved 7(=X) 1=Address Offset mode enabled 6(=0) 1=SET FEATURES subcommand required to spin-up 5(=0) 1=Power-Up In Standby feature set has been enabled via the SET FEATURES command 4(=0) 1=Removable Media Status Notification Feature Set enabled 3(=X) 1=Advanced Power management Feature Set enabled 2(=0) 1=CFA Feature Set supported 1(=0) 1=READ/WRITE DMA QUEUED command supported 0(=0) 1=DOWNLOAD MICROCODE command supported Command set/feature enabled 15(=0) Always 14(=1) Always 13- 0(=0) Reserved Ultra DMA Transfer mode (mode 4 supported) 15-13(=0) Reserved 12(=X) 1=UltraDMA mode 4 is selected 11(=X) 1=UltraDMA mode 3 is selected 10(=X) 1=UltraDMA mode 2 is selected 9(=X) 1=UltraDMA mode 1 is selected 8(=X) 1=UltraDMA mode 0 is selected 7- 5(=0) Reserved 4(=1) 1=UltraDMA mode 4 is supported 3(=1) 1=UltraDMA mode 3 is supported 2(=1) 1=UltraDMA mode 2 is supported 1(=1) 1=UltraDMA mode 1 is supported 0(=1) 1=UltraDMA mode 0 is supported Time required for security erase unit completion Time= value (XXXXh) * 2 [minutes] Time required for Enhance security erase completion 0000 : Not supported Current Advanced Power Management level 15- 8(=40h) Reserved 7- 0(=X) Correct Advanced Power Management level set by Set Features Command (01h to FEh) Reserved Note. The ' *' mark in the 'Content' field indicates the use of those parameters that are vendor specific. Figure 79. Identify device information (5 of 7) Travelstar 32GH/30GT/20GN hard disk drive specifications 119