IBM DJSA-210 Hard Drive Specifications - Page 144
Read Long 22h/23h, This indicates the sector number of the sector to be transferred. L = 0 In LBA
View all IBM DJSA-210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 144 highlights
13.14 Read Long (22h/23h) Command Block Output Registers Register 7 6 5 4 3 2 1 0 Data Feature Sector Count 0 0 0 0 0 0 0 1 Sector Number V V V V V V V V Cylinder Low V V V V V V V V Cylinder High V V V V V V V V Device/Head 1 L 1 D H H H H Command 0 0 1 0 0 0 1 R Command Block Input Registers Register 7 6 5 4 3 2 1 0 Data Error see below Sector Count V Sector Number V V V V V V V V Cylinder Low V V V V V V V V Cylinder High V V V V V V V V Device/Head - - - - H H H H Status see below Error Register 76543210 CRC UNC 0 IDN 0 ABT T0N AMN 000V0V0V Status Register 7 6 5 4 3 2 10 BSY RDY DF DSC DRQ COR IDX ERR 0 V 0 V - 0 -V Figure 87. Read Long command (22h/23h) The Read Long command reads the designated one sector of data and the ECC bytes from the disk media. It then transfers the data and ECC bytes from the device to the host. After 512 bytes of data have been transferred, the device will keep setting DRQ = 1 to indicate that the device is ready to transfer the ECC bytes to the host. The data is transferred 16 bits at a time and the ECC bytes are transferred 8 bits at a time. The number of ECC bytes are 4 or 40 according to the setting of Set Feature option. The default setting is 4 bytes of ECC data. The command makes a single attempt to read the data and does not check the data using ECC. Whatever is read is returned to the host. Output Parameters To The Device Sector Count This indicates the number of continuous sectors to be transferred. The Sector Count must be set to one. Sector Number This indicates the sector number of the sector to be transferred. (L = 0) In LBA mode, this register contains LBA bits 0-7. (L = 1) Cylinder High/Low This indicates the cylinder number of the sector to be transferred. (L = 0) In LBA mode, this register contains LBA bits 8-15 (Low), 16-23 (High). (L = 1) H This indicates the head number of the sector to be transferred. (L = 0) In LBA mode, this register contains LBA bits 24-27. (L = 1) Travelstar 32GH/30GT/20GN hard disk drive specifications 130