IBM DJSA-210 Hard Drive Specifications - Page 85
General operation descriptions, 1 Reset response
View all IBM DJSA-210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
11.0 General operation descriptions 11.1 Reset response ATA has the following three types of resets: Power On Reset (POR) The device executes a series of electrical circuitry diagnostics, spins up the HDA, tests speed and other mechanical parametric, and sets default values. Hard Reset (Hardware Reset) The RESET signal is negated in the ATA Bus. The device resets the interface circuitry and sets the default values. Soft Reset (Software Reset) The SRST bit in the Device Control Register is set and then is reset. The device resets the interface circuitry according to the Set Features requirement. The actions of each reset are shown in Figure 54 on page 72. Travelstar 32GH/30GT/20GN hard disk drive specifications 71
11.0 General operation descriptions
11.1 Reset response
ATA has the following three types of resets:
The SRST bit in the Device Control Register is set and then is reset. The
device resets the interface circuitry according to the Set Features
requirement.
Soft Reset (Software Reset)
The RESET signal is negated in the ATA Bus. The device resets the
interface circuitry and sets the default values.
Hard Reset (Hardware Reset)
The device executes a series of electrical circuitry diagnostics, spins up
the HDA, tests speed and other mechanical parametric, and sets default
values.
Power On Reset (POR)
The actions of each reset are shown in Figure 54 on page 72.
Travelstar 32GH/30GT/20GN hard disk drive specifications
71