IBM DJSA-210 Hard Drive Specifications - Page 150
Read Sectors 20h/21h, This is the cylinder number of the first sector to be transferred. L = 0
View all IBM DJSA-210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 150 highlights
13.17 Read Sectors (20h/21h) Command Block Output Registers Register 7 6 5 4 3 2 1 0 Data Feature Sector Count V V V V V V V V Sector Number V V V V V V V V Cylinder Low V V V V V V V V Cylinder High V V V V V V V V Device/Head 1 L 1 D H H H H Command 0 0 1 0 0 0 0 R Command Block Input Registers Register 7 6 5 4 3 2 1 0 Data Error see below Sector Count V V V V V V V V Sector Number V V V V V V V V Cylinder Low V V V V V V V V Cylinder High V V V V V V V V Device/Head Status - - - - H H H H see below Error Register 76543210 CRC UNC 0 IDN 0 ABT T0N AMN 0V0V0V0V Status Register 7 6 5 4 3 2 10 BSY RDY DF DSC DRQ COR IDX ERR 0 V 0 V - 0 -V Figure 90. Read Sectors command (20h/21h) The Read Sectors command reads one or more sectors of data from disk media and then transfers the data from the device to the host. The sectors are transferred through the Data Register 16 bits at a time. If an uncorrectable error occurs the read will be terminated at the failing sector. Output Parameters To The Device Sector Count The number of continuous sectors to be transferred. If zero is specified, then 256 sectors will be transferred. Sector Number This is the sector number of the first sector to be transferred. (L = 0) In LBA mode this register contains the LBA bits 0-7. (L = 1) Cylinder High/Low This is the cylinder number of the first sector to be transferred. (L = 0) In LBA mode this register contains the LBA bits 8-15 (Low) and bits 16-23 (High). (L = 1) H This is the head number of the first sector to be transferred. (L = 0) In LBA mode this register contains the LBA bits 24-27. (L = 1) R This is the retry bit. If is set to one and then retries are disabled. Travelstar 32GH/30GT/20GN hard disk drive specifications 136