IBM DJSA-210 Hard Drive Specifications - Page 177
S.M.A.R.T. Enable/Disable Automatic Off-Line subcommand DBh, Enable Off-line Read Scanning F9h
View all IBM DJSA-210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 177 highlights
13.32.1.11 S.M.A.R.T. Enable/Disable Automatic Off-Line (subcommand DBh) This subcommand enables and disables the optional feature that cause the device to perform the set of off-line data collection activities that automatically collect attribute data in an off-line mode and then save this data to the device's nonvolatile memory. This subcommand may either cause the device to automatically initiate or resume performance of its off-line data collection activities or cause the automatic off-line data collection feature to be disabled. This subcommand also enables and disables the off-line read scanning feature that cause the device to perform the entire read scanning with defect reallocation as the part of the off-line data collection activities. The Sector Count register shall be set to specify the feature to be enabled or disabled. Enable Off-line Read Scanning F9h Enable Automatic Off-line F8h Disable Off-line Read Scanning 01h Disable Automatic Off-line 00h Feature Description Sector Count A value of zero-written by the host into the device's Sector Count register before issuing this subcommand-shall cause the automatic off-line data collection feature to be disabled. Disabling this feature does not preclude the device from saving attribute values to nonvolatile memory during some other normal operation-such as during a power-on, during a power-off sequence, or during an error recovery sequence. A value of one written by the host into the device's Sector Count register before issuing this subcommand shall cause the off-line read scanning feature to be disabled. The Device does not perform the off-line read scanning at the off-line data collection activities which is initiated by the S.M.A.R.T. Execute Off-line Immediate(Subcommand D4h) or automatically if the off-line read scanning feature is disabled. A value of F8h-written by the host into the device's Sector Count register before issuing this subcommand-shall cause the automatic Off-line data collection feature to be enabled. A value of F9 written by the host into the device's Sector Count register before issuing this subcommand shall cause the off-line read scanning feature to be enabled. The Device perform the off-line read scanning at the off-line data collection activities which is initiated by the S.M.A.R.T. Execute Off-line Immediate(Subcommand D4h) even if the automatic off-line feature is disabled. Any other non-zero value-written by the host into this register before issuing this subcommand-is vender specific and will not change the current Automatic Off-Line Data Collection and Off-line Read Scanning status. However, the device may respond with the error code specified in Figure 120 on page 175. Travelstar 32GH/30GT/20GN hard disk drive specifications 163