IBM DJSA-210 Hard Drive Specifications - Page 200
Write Verify 3Ch: vendor specific
View all IBM DJSA-210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 200 highlights
R This indicates the retry bit. If the retry bit is set to one then retries are disabled. When the write cache is enabled the retry bit is ignored. (Ignoring the retry bit is in violation of ATA-3.) Input Parameters From The Device Sector Count This indicates the number of requested sectors not transferred. The Sector Count will be zero unless an unrecoverable error occurs. Sector NumberThis indicates the sector number of the last transferred sector. (L = 0) In LBA mode this register contains the current LBA bits 0-7. (L = 1) Cylinder High/Low This indicates the cylinder number of the last transferred sector. (L = 0) In LBA mode this register contains the current LBA bits 8-15 (Low) and bits 16-23 (High). (L = 1) H This indicates the head number of the last transferred sector. (L = 0) In LBA mode this register contains the current LBA bits 24-27. (L = 1) 13.40 Write Verify (3Ch: vendor specific) In DJSA-XXX implementation, the Write Verify command is exactly the same as Write Sectors command (30h). No read verification is performed after the write operation. Refer to 13.39, "Write Sectors Command," on page 185 for parameters. Travelstar 32GH/30GT/20GN hard disk drive specifications 186