IC Realtime HDVR-MX0402-1U5MP-AI2-WEB Product Manual - Page 133
System Events
View all IC Realtime HDVR-MX0402-1U5MP-AI2-WEB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 133 highlights
For PTZ activation, different from motion detection, the video loss detection can activate PTZ preset, tour, and pattern. Step 3 Click Apply to complete the settings. ● Click Default to restore the default setting. ● Click Copy to, in the Copy to dialog box, select the additional channel(s) that you want to copy the motion detection settings to, and then click Apply. 5.10.4.3 Configuring Tampering Settings When the camera lens is covered, or the video will be displayed in a single color because of the causes such as sunlight status, the monitoring cannot be continued normally. To avoid such situations, you can configure the tampering alarm settings. Step 1 Select Main Menu > Advanced Settings > Alert Center > Video Detection > Video Tampering. The Video Tampering interface will be displayed. Figure 5-40 Step 2 To configure the settings for the tampering detection parameters, see"5.10.4.1 Configuring Motion Detection Settings." For PTZ activation, different from motion detection, the video loss detection can activate PTZ preset, tour, and pattern. Step 3 Click Apply to complete the settings. ● Click Default to restore the default setting. ● Click Copy to, in the Copy to dialog box, select the additional channel(s) that you want to copy the motion detection settings to, and then click Apply. 5.10.5 System Events This section allows for the configuration of the alarm output for three types of system event (HDD, Network,