IC Realtime HDVR-MX0402-1U5MP-AI2-WEB Product Manual - Page 94

Step 2 Configure the channels. ● Analog Channel: Select the transmission medium such as AVS, AHD, CVBS, and then follow the onscreen instructions to complete the settings. ● IP Channel: You can enable the IP channels by disabling the corresponding analog channels. The Device also provides expanded IP channels for your use, such as the 17-64 channels in 0. The 17-64 channels are only for IP cameras and the range changes depending on the model purchased. ● The channel selection for analog camera or IP camera is in sequence, for example, if you want to select channels for an IP camera, you need to select from the last channel number Channel 16 first, which means you cannot navigate to select the channel 15 directly until you have selected the channel 16. Step 3 Click Apply and follow the onscreen instructions to complete the settings. 5.6 Configuring Remote Devices 5.6.1 Adding Remote Devices This function is available after you have configured the channel type as IP channel as described in the previous section, see "5.5.7 Configuring Channel Type." You can add remote devices by automatically or manually adding the IP address. Select ain Menu > Advanced Settings > CAMERA Configuration > Add/Remove Device > Add Camera, the Add Camera interface will be displayed. Figure 5-15