IC Realtime HDVR-MX0402-1U5MP-AI2-WEB Product Manual - Page 159
Main Menu > Advanced Settings> StorageSchedule > Picture
View all IC Realtime HDVR-MX0402-1U5MP-AI2-WEB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 159 highlights
Report Alarm Select the Report Alarm check box to enable the system to upload the alarm signal to the network (including alarm center) when an alarm event occurs. ● Not all models support this function. ● The corresponding parameters in the alarm center should be configured. Parameter Send Email Record Channel PTZ Linkage Post-Record Tour Picture Storage Description Select the Send Email check box to enable the system to send an email notification when an alarm event occurs. To use this function, make sure the email function is enabled in Main Menu > Advanced Settings > Network > EMAIL. Select the channel(s) that you want to record. The selected channel(s) will record after the event has been triggered. The recording for intelligence event and auto recording function must be enabled." Click Setting to display the PTZ interface. Enable PTZ linkage actions, such as selecting the preset that you want to be called when an alarm event occurs. To use this function, the PTZ operations must be configured. " Set a length of time for the Device to delay turning off recording after the event has ended. The value ranges from 10 seconds to 300 seconds. Select the Tour check box to enable a tour of the selected channels. ● To use this function, the tour setting must be configured. ● After the tour is ended, the live view screen returns to the view layout before tour started. Select the Picture Storage check box to take a snapshot of the selected channel. To use this function, make sure the snapshot function is enabled for Intel in Main Menu > Advanced Settings> StorageSchedule > Picture Storage.