IC Realtime HDVR-MX0402-1U5MP-AI2-WEB Product Manual - Page 139
Setting, Parameter, Description, Show Message, Report Alarm, Send Email, Main Menu > Advanced
View all IC Realtime HDVR-MX0402-1U5MP-AI2-WEB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 139 highlights
Alarm-out Port Click Setting to display setting interface. ● General Alarm: Enable general alarm and select the alarm output port. ● Ext. Alarm: Connect the alarm box to the Device and then enable it. ● Wireless Siren: Connect the wireless gateway to the Device and then enable it. For details, see "5.12 IoT Function." When an alarm event occurs, the system connects the peripheral alarm devices to the selected output port. Parameter Post-Alarm Show Message Report Alarm Send Email Record Channel PTZ Linkage Post Record Tour Description Set a length of time for the Device to delay turning off alarm after the external alarm has ended. The value ranges from 0 seconds to 300 seconds. If you enter 0, there will be no delay. Select the Show Message check box to enable a pop-up alarm message in your local host PC. Select the Report Alarm check box to enable the system to upload the alarm signal to the network (including alarm center) when an alarm event occurs. ● Not all models support this function. ● The corresponding parameters in the alarm center should be configured. Select the Send Email check box to enable the system to send an email notification when an alarm event occurs. To use this function, make sure the email function is enabled in Main Menu > Advanced Settings > Network > Email. Select the channel(s) that you want to record. The selected channel(s) will record after the event has been triggered. The recording for intelligence event and auto recording function must be enabled." Click Setting to display the PTZ interface. Enable PTZ linkage actions, such as selecting the preset that you want to be called when an alarm event occurs. To use this function, the PTZ operations must be configured. Set a length of time for the Device to delay turning off recording after the event has ended. The value ranges from 10 seconds to 300 seconds. Select the Tour check box to enable a tour of the selected channels. ● To use this function, the tour setting must be configured. ● After the tour is ended, the live view screen returns to the view layout before tour started.