IC Realtime HDVR-MX0402-1U5MP-AI2-WEB Product Manual - Page 134
Configuring HDD Event Settings
View all IC Realtime HDVR-MX0402-1U5MP-AI2-WEB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
and User). When there is an abnormal system event occurs, the system activates alarms in the way that you configure in this section. 5.10.5.1 Configuring HDD Event Settings Step 1 Select Main Menu > Advanced Settings > Alert Center > Alarm > Abnormality> Disk. The Disk interface will be displayed. Figure 5-41 Step 2 Configure the settings for the HDD event. Parameter Description Event Type In the Event Type list, select No Disk, Disk Error, or Low Space as the event type. Enable Alarm-out Port Enable or disable the HDD event detection function. Click Setting to display the setting interface. ● Local Alarm: Enable alarm activation through the alarm devices Post-Alarm Set a length of time for the Device to delay turning off the alarm after the external alarm has ended. The value ranges from 10 seconds to 300 seconds, and the default value is 10 seconds. Show Message Report Alarm Select the Show Message check box to enable a pop-up message in your desktop software. Select the Report Alarm check box to enable the system to upload the alarm signal to the network (including alarm center) when an alarm event occurs.