IC Realtime HDVR-MX0402-1U5MP-AI2-WEB Product Manual - Page 162
Parameter, Description, Appear, Cross, Direction, Enter&Exit, Enter, Human, Motor Vehicle,
View all IC Realtime HDVR-MX0402-1U5MP-AI2-WEB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 162 highlights
Figure 5-61 3) Configure the settings for the parameters of drawing rules. Parameter Description Name Action Direction Enter the customized rule name. Configure the actions that are defined as intrusion. You can select the Appear check box and the Cross check box. In the Direction list, select the direction of crossing the configured area. You can select Enter&Exit, Enter, and Exit. Click to draw areas to filter the target. Target Filter You can configure two filtering targets (maximum size and minimum size). When the target that is crossing the tripwire is smaller than the minimum size or larger than the maximum size, no alarms will be activated. The maximum size should be larger than the minimum size. Effective Target Enable the AI Recognition function ( ). By default, Human and Motor Vehicle are selected for alarm object. 4) Drag to draw an area. 5) Click OK to save the settings. Step 3 Click to set the actions to be triggered. Step 4 Select the Enable check box, and then click Apply. The intrusion detecting function is active. When the target enters and leaves the area, or the target appears in the defined area, the system activates alarms.