IC Realtime HDVR-MX0402-1U5MP-AI2-WEB Product Manual - Page 248
Appendix 7.4 The Shortcut Way to Check the Electric System by, Digital Multimeter
View all IC Realtime HDVR-MX0402-1U5MP-AI2-WEB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 248 highlights
● Please connect the ground end of 3-pin socket in the monitor system to the ground port of the system (protection ground cable) Appendix 7.4 The Shortcut Way to Check the Electric System by Digital Multimeter For 220V AC socket, from the top to the bottom, E (ground cable), N (neutral cable), L (live cable). Please refer to the following figure. There is a shortcut way to check whether these three cables connection are standard or not (not the accurate check). In the following operations, the multimeter range shall be at 750V. For E (earth cable) Turn the digital multimeter to 750V AC, use your one hand to hold the metal end, and then the other hand inserts the pen to the E port of the socket. See the following figure. If the multimeter shows 0, then you can see current earth cable connection is standard. If the value is more than 10, then you can know there is inductive current and the earth cable connection is not proper.