IC Realtime HDVR-MX0402-1U5MP-AI2-WEB Product Manual - Page 52
Configuring Encode Settings
View all IC Realtime HDVR-MX0402-1U5MP-AI2-WEB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
2) Tap Start Live Preview or Save at the bottom. The Device is added and displayed on the live view interface of the cell phone. See Figure 4-27. Figure 4-27 5.1.4.6 Configuring Encode Settings This section allows for the configuration of the settings of main stream and sub stream for the Device. You can also configure encode settings by selecting Main Menu> Advanced Settings > CAMERA Configuration > Encode > Audio/Video. Step 1 After you have configured the P2P settings, on the Audio/Video interface, click Next. The Encode interface will be displayed.
2) Tap
Start Live Preview
or
Save
at the bottom.
The Device is added and displayed on the live view interface of the cell phone.
See Figure 4-27.
Figure 4-27
5.1.4.6
Configuring Encode Settings
This section allows for the configuration of the settings of main stream and sub stream for the Device.
You can also configure encode settings by selecting
Main Menu> Advanced Settings > CAMERA Configuration >
Encode >
Audio/Video
.
Step 1
After you have configured the P2P settings, on the
Audio/Video
interface, click
Next
.
The
Encode
interface will be displayed.