IC Realtime HDVR-MX0402-1U5MP-AI2-WEB Product Manual - Page 136
Configuring Disarming
View all IC Realtime HDVR-MX0402-1U5MP-AI2-WEB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 136 highlights
Post-Alarm Show Message Set a length of time for the Device to delay turning off alarm after the external alarm has ended. The value ranges from 10 seconds to 300 seconds, and the default value is 10 seconds. Select the Show Message check box to enable a pop-up message in your local host PC. Parameter Description Select the Send Email check box to enable the system to send an email notification when an alarm event occurs. Send Email To use this function, make sure the email function is enabled in Main Menu > Advanced Settings > Network > Email. Buzzer Select the check box to activate the onboard buzzer of the Recorder. Log Select the check box to enable the Device to record a local alarm log. Post Record Continue to record for some time after the alarm is ended. The value ranges from 10 seconds to 300 seconds. Alarm Tone Select to enable audio broadcast/alarm tones in response to a network alarm event. Step 3 Click Apply to complete the settings. 5.10.6 Configuring Disarming This section allows you to disarm all alarm linkage actions as needed. Step 1 Select Main Menu > Advanced Settings > Alert Center > Alarm > Disarming. Step 2 Click to enable disarming. Step 3 Select alarm linkage actions to disarm.