IC Realtime HDVR-MX0402-1U5MP-AI2-WEB Product Manual - Page 98
Step 8 Click
View all IC Realtime HDVR-MX0402-1U5MP-AI2-WEB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Step 7 Configure the IP address. ● Select the DHCP check box, you do not need to enter the IP address information, because the system will allocate one IP address to the remote device. ● Select the STATIC check box, you need to enter the IP address, subnet mask, default gateway, and incremental value. The system will allocate the IP address to the remote devices by progressively increasing the last part of the IP address when initializing devices in batches. When configuring IP addresses for multiple remote devices which were not in the same network segment, these remote devices will belong to the same network segment after configuration. Step 8 Click Next. The initializing is started. After the process is completed, see Figure 5-17. Figure 5-17 Step 9 Click OK to complete the settings.