IC Realtime HDVR-MX0402-1U5MP-AI2-WEB Product Manual - Page 79
Controlling PTZ Cameras
View all IC Realtime HDVR-MX0402-1U5MP-AI2-WEB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Logout ● Record Schedule: Configure recording type and time settings. Click to go to select Shutdown, Reboot or Logout. 5.4 Controlling PTZ Cameras Pan-tilt-zoom (PTZ) cameras are built with mechanical parts that allow them to move left to right, tilt up and down, and zoom in and out of a scene to provide all-around view to the camera. Before operating PTZ, ensure the PTZ is pwoered correctly and connected to the HDVR 5.4.1 Configuring PTZ Connection Settings You need to configure the PTZ connection settings before use. ● Local connection: RS-485 Port for connecting speed dome or coaxial cable for connecting coaxial camera. ● Remote connection: local area network. Step 1 Select Main Menu > Advanced Settings > Camera Configuration > PTZ. The PTZ interface will be displayed. Step 2 Configure the settings for the PTZ connection parameters. Parameter Channel Type Control Mode Protocol Description In the Channel list, select the channel that you want to connect the PTZ camera to. ● Local: Connect through RS-485 port or coaxial cable. ● Remote: Connect through network by adding IP address of PTZ camera to the Device. In the Control Mode list, select Serial Port or HD-AVS. For AVS series products, select HD-AVS. The control signal is sent to the PTZ through the coaxial cable. For the serial mode, the control signal is sent to the PTZ through the RS-485 port. In the Protocol list, select the protocol for the PTZ camera. Selections include HDAVS2.0 and HDAVS3.0.