IC Realtime HDVR-MX0402-1U5MP-AI2-WEB Product Manual - Page 169
Channel, Parameter, Description, Snapshot, Main Menu > Advanced Settings>, Camera Configuration
View all IC Realtime HDVR-MX0402-1U5MP-AI2-WEB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 169 highlights
Step 2 In the Channel list, select a channel that you want to configure face detection function, and then enable it. Step 3 Configure the parameters according to your needs. See below for parameters and description. Parameter Channel Enable Sensitivity Effective Target Schedule Post Record Record Channel Picture Storage Tour Description In the Channel list, select a channel to set the motion detection. Enable or disable the motion detection function. Set the sensitivity for Intelligent Motion detection. Select human or motor vehicle or both. iMD will only be triggered whenthe chosen target is detected. Define a period during which the motion detection is active. Set a length of time for the Device to delay turning off recording after the event has ended. The value ranges from 10 seconds to 300 seconds, and the default value is 10 seconds. Select the channel(s) that you want to record. The selected channel(s) will record after the event has been triggered. The recording for motion detection and auto recording function must be enabled. Select the Snapshot check box to take a snapshot of the selected channel. To use this function, select Main Menu > Advanced Settings> Camera Configuration > Video Stream > Snapshot, in the Type list, select Event. Select the Tour check box to enable a tour of the selected