IC Realtime IPFX-D80V-IRW1 Product Manual - Page 113
Setting > System > Safety > Firewall
View all IC Realtime IPFX-D80V-IRW1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
When you access the camera through internet, MAC address verifies according to the router MAC. This section takes Network Access as an example. Step 1 Select Setting > System > Safety > Firewall. The Firewall interface is displayed. See Figure 4-109. IP filter Step 2 Select Network Access from Rule Type list, and then select the Enable check box. Enable PING prohibited and Prevent Semijoin, and click Save. You do not need to configure parameters. Enable Network Access, and configure trust list and banned list. 1) Select the mode: TrustList and BannedList. 2) Click Add IP/MAC. The Add IP/MAC interface is displayed. See Figure 4-110. Add IP/MAC Configure parameters. For details, see Table 4-40. Basic Configuration 105
Basic Configuration
105
When you access the camera through internet, MAC address verifies according to the
router MAC.
This section takes
Network Access
as an example.
Step 1
Select
Setting > System > Safety > Firewall
.
The
Firewall
interface is displayed. See Figure 4
-
109.
IP filter
Step 2
Select
Network Access
from
Rule Type
list, and then select the
Enable
check box.
Enable
PING prohibited
and
Prevent Semijoin
, and click
Save
. You do not need
to configure parameters.
Enable
Network Access
, and configure trust list and banned list.
1)
Select the mode:
TrustList
and
BannedList
.
2)
Click
Add IP/MAC
.
The
Add IP/MAC
interface is displayed. See Figure 4
-
110.
Add IP/MAC
Configure parameters. For details, see Table 4
-
40.