IC Realtime IPFX-D80V-IRW1 Product Manual - Page 57

Parameter Description Sensitivity The sensitivity of triggering focus. The bigger the value is, the easier the focus will be triggered. Click Save. Click Lens Initialization, the lens will adjust the zoom and focus parameters. 4.5.1.1.8 IR Light This configuration is available only when the device is equipped with IR light. Select Setting > Camera > Conditions > Conditions > IR Light. The IR Light interface is displayed. See Figure 4-40. IR light Configure IR light mode. For details, see Table 4-14. Table 4-14 Description of IR light mode IR light mode Description Manual Adjust the brightness of IR light manually, and then the system will supply IR light to the image accordingly. Auto The system adjusts the IR light intensity according to the ambient lighting Smart IR condition. The system adjusts the IR light intensity automatically according to the change of the ambient light. When the ambient light turns darker, the system turns on the low beam lights first, if the brightness is still not enough, it turns on the high beam lights then. ZoomPrio When the ambient light turns brighter, the system dims high beam lights until they are off, and then the low beam lights. When the focus reaches certain wide angle, the system doesn't turn on high beam light in order to avoid over-exposure in short distance. In the meantime, you can configure light compensation manually to make fine adjustment to the IR light intensity. Off IR light is off. Click Save. Basic Configuration 49