IC Realtime IPFX-D80V-IRW1 Product Manual - Page 115
External Light
View all IC Realtime IPFX-D80V-IRW1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
Parameter Table 4-41 Description of serial port settings parameters Description The corresponding device address. It is 1 by default. Address Baud Rate Date bit Stop BIt Parity Click Save. Make sure that the address is the device address, otherwise you cannot control the device. Select the boud rate for the camera. It is 9600 by default. It is 8 by default. It is 1 by default. It is None by default. 4.8.6.2 External Light You need to configure external light mode when the external light is used. Preparation Connect external light with RS-485 port. You have configured serial port parameters. For details, see "4.8.6.1 Serial Port Settings." Procedures Step 1 Select Setting > System > Peripheral > External Light. The External Light interface is displayed. See Figure 4-112. External light Configure external light work mode. For details, see Table 4-42. Basic Configuration 107