IC Realtime IPFX-D80V-IRW1 Product Manual - Page 149
Setting Face Database
View all IC Realtime IPFX-D80V-IRW1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 149 highlights
Parameter Snap Mode Description Optimized Snapshot: Capture the clearest picture within the set time after the device detects face. Preferred Recognition: Repeatedly compare the face to the armed face database after the device detects face, and capture the picture most matching with the face database. It is recommended to use this mode in access control scene. Click Advanced to set the preferred time. Attribute Select Attribute, and click face detection. to set the display of face attribute for Snapshot Angle Filter: Set snapshot angle to be filtered for face detection. Advanced Snapshot Sensitivity: Set snapshot sensitivity for face detection. It is easier to detect face with higher sensitivity. Optimized Time: Set a time period to capture the clearest picture after the device detects face. Enable Face Select Enable Face Exposure. When face is detected, the device can Exposure enhance brightness of the face to make face image clear. Face Target Brightness Set the face target brightness. It is 50 by default. Face Exposure Set the face exposure detection interval to prevent image flickering Detection caused by constant adjustment of face exposure. It is five seconds by Interval default. Click Draw Target at the right side of Pixel Counter, and then press and Pixel Counter hold the left mouse button to draw a rectangle, the Pixel Counter then displays its pixel. Set arming periods and alarm linkage action. For details, see "5.1.1 Alarm Linkage." Click Save. 5.10.2 Setting Face Database By setting face database, the face database information can be used to compare with the face detected. Face database setting includes creating face database, adding face picture, and face modeling. 5.10.2.1 Creating Face Database Face database includes face picture, face data and other information. It also provides comparison data for the captured face pictures. Select Setting > Event > Face Recognition > Face Database Config. The Face Database Config interface is displayed. See Figure 5-29. Event 141