IC Realtime IPFX-D80V-IRW1 Product Manual - Page 33
Idle Motion, PowerUp
View all IC Realtime IPFX-D80V-IRW1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
4.3.2.7 Idle Motion PTZ idle motion is a function of a PTZ camera where you can set an interval of idle time before the camera defaults to one of the following: Preset, scan, tour, or pattern. Preparation You have configured the PTZ motions, including preset, scan, tour, or pattern. Procedures Select Setting > PTZ settings > Function > Idle Motion. The Idle Motion interface is displayed. See Figure 4-14. Idle motion Select the Enable check box to enable idle motion. Select idle motion and set idle time. You need to select the corresponding number for some selected idle motions, such as Preset001. Click Save 4.3.2.8 PowerUp After setting Powerup motion, the camera will execute the configured motion after power up. Preparation You have configured the PTZ motions, including preset, scan, tour, or pattern. Basic Configuration 25