IC Realtime IPFX-D80V-IRW1 Product Manual - Page 91

Configure parameters. For details, see Table 4-30. Parameter Table 4-30 Description of QoS parameter Description Configure the priority of the data packets that used for network Realtime Monitor surveillance. 0 for the lowest and 63 the highest. Command Configure the priority of the data packets that used for configure or checking. Click Save. 4.6.12 Access Platform 4.6.12.1 P2P P2P is a private network traversal technology which enables user to manage devices easily without requiring DDNS, port mapping or transit server. Scan the QR code with your smart phone, and then you can add and manage more devices on the mobile phone client. Step 1 Select Setting > Network >Access Platform > P2P. The P2P interface is displayed. See Figure 4-80. P2P  When P2P is enabled, remote management on device is supported.  When P2P is enabled and the device accesses to the network, the status shows online. The information of the IP address, MAC address, device name, and device SN will be collected. The collected information is for remote access only. You can cancel Enable selection to reject the collection. Log in to mobile phone client and tap Device management. Tap the + at the upper right corner. Scan the QR code on the P2P interface. Follow the instructions to finish the settings. Basic Configuration 83