IC Realtime IPFX-D80V-IRW1 Product Manual - Page 161
Enable Face Exposure
View all IC Realtime IPFX-D80V-IRW1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 161 highlights
Parameter Snap Mode Description Instant Snap: The device snaps a face immediately when detecting it. Optimized Snapshot: Capture the clearest picture within the set time after the device detects face. Quality Priority: The device snaps a face only when detecting that the snapped face picture has higher quality than the quality threshold. Click Advanced to set Optimized Time and Quality Threshold. Attribute Select Attribute, and click face detection. to set the display of face attribute for Snapshot Angle Filter: Set snapshot angle to be filtered for face detection. Snapshot Sensitivity: Set snapshot sensitivity for face detection. It is Advanced easier to detect face with higher sensitivity. Quality Threshold: If you select Quality Threshold, and then select Quality Priority for Snap Mode, the device detects the face attribute only when the snapped face picture has higher quality than the quality threshold. Optimized Time: Set a time period to capture the clearest picture after the device detects face. Enable Face Select Enable Face Exposure. When face is detected, the device can Exposure enhance brightness of the face to make face image clear. Face Target Set the face target brightness, 50 by default. Brightness Face Exposure Set the face exposure detection interval to prevent image flickering Detection Interval caused by constant adjustment of face exposure. it is five seconds by default. Click Draw Target at the right side of Pixel Counter, and then press and Pixel Counter hold the left mouse button to draw a rectangle, the Pixel Counter then displays its pixel. Set arming periods and alarm linkage action. For details, see "5.1.1 Alarm Linkage." Click Save. To view alarm information on the Alarm tab, you should subscribe relevant alarm event. For details, see "5.1.2 Subscribing Alarm." Verification The face detection result is displayed on the preview interface. See Figure 5-47. The face pictures snapped in real time and their attribute information are displayed. Click a face picture in the display area, and the information is displayed. Event 153