IC Realtime IPFX-D80V-IRW1 Product Manual - Page 170

Setting ANPR

Get IC Realtime IPFX-D80V-IRW1 PDF manuals and user guides View all IC Realtime IPFX-D80V-IRW1 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 170 highlights

actual conditions.  Calibration mode 2: Draw a area in the image to automatically calculate the installation height and the angle. Preparation You have set at least one rule under Setting > Event > Stereo Analysis > Stereo Analysis. Procedures Take the calibration mode 2 as an example. Select Setting > Event > Stereo Analysis > Calibration Config. The Calibration Config interface is displayed, see Figure 5-53. Calibration config (stereo analysis) Click Clear to clear the default calibration box. Click Ground to draw a rectangular box in the image. Ground should be on the same plane and as big as possible for calibration. Click Save, and then the device calculates its height above the ground and the angle it forms with the ground. If the height and angle are quite different from the actual situation, repeat Step 2-Step 4. Setting ANPR You can use this function to extract information about motor vehicles, non-motor vehicles, and people from images and display related attributes on the preview interface. 5.15.1 Scene Configuration Configure ANPR scene, including non-motor vehicle detection, local word setting, alarm linkage, and lane drawing. Event 162

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
Event
162
actual conditions.
Calibration mode 2: Draw a area in the image to automatically calculate the installation
height and the angle.
Preparation
You have set at least one rule under
Setting
>
Event
>
Stereo Analysis
>
Stereo Analysis
.
Procedures
Take the calibration mode 2 as an example.
Select
Setting > Event > Stereo Analysis > Calibration Config
.
The
Calibration Config
interface is displayed, see Figure 5
-
53.
Calibration config (stereo analysis)
Click
Clear
to clear the default calibration box.
Click
Ground
to draw a rectangular box in the image.
Ground should be on the same plane and as big as possible for calibration.
Click
Save
, and then the device calculates its height above the ground and the angle it
forms with the ground.
If the height and angle are quite different from the actual situation, repeat Step 2–Step
4.
Setting ANPR
You can use this function to extract information about motor vehicles, non
-
motor vehicles, and
people from images and display related attributes on the preview interface.
5.15.1
Scene Configuration
Configure ANPR scene, including non
-
motor vehicle detection, local word setting, alarm linkage,
and lane drawing.