IC Realtime IPFX-D80V-IRW1 Product Manual - Page 114
Peripheral
View all IC Realtime IPFX-D80V-IRW1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
Table 4-40 Description of adding IP/MAC parameters Parameter Description Select IP address, IP segment, MAC address or all IP addresses. IP address: Select IP version and enter the IP address of the host to be added. Rule Type IP segment: Select IP version and enter the start address and end address of the segment to be added. MAC address: Enter MAC address of the host to be added. All IP addresses: Set all IP addresses in trust list or Banned list. Device All Ports Set access ports. You can select all ports or the ports in defined Device Start Server Port areas. Device all ports: Set all IP port in trust list or Banned list. When selecting BannedList in Mode, and All IP Address in Rule Type, you cannot select the Device All Ports check Device End Server Port box. Device start server port and Device end server port: Set Device start server port and device end server port, and the range is 1-65535. Step 4 Click OK, and the Firewall interface is displayed. Step 5 Click Save. 4.8.6 Peripheral 4.8.6.1 Serial Port Settings Set the serial port of external device. Step 1 Select Setting > System > Peripheral > Serial Port Settings. The Serial Port Settings interface is displayed. See Figure 4-111. Serial port settings Configure serial port settings parameters. For details, see Table 4-41. Basic Configuration 106