IC Realtime IPFX-D80V-IRW1 Product Manual - Page 121
Snapshot Linkage
View all IC Realtime IPFX-D80V-IRW1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
The Record Control interface is displayed. See Figure 5-5. Record control Set parameters. See Table 5-1. Parameter Pack Duration Pre-event Record Table 5-1 Description of record control parameters Description The pack duration for each video. The time to record in advance in case of an alarm. For example, if the pre-event record is set to be 5, the system saves the record of 5 seconds before such alarm is triggered. When an alarm or motion links recording, the system saves the video data in pre-event record to the video file if the record is not enabled. Disk Full Stop: Stop recording when the disk is full. Overwrite: Cyclically overwrite the earliest video when the disk is full. Record The system starts recording in Manual mode. The system starts recording in Mode a set time period of record plan in Auto mode. Record Stream Select record stream, including Main Stream and Sub Stream. Click Save. 5.1.1.2.3 Setting Record Linkage On the alarm event setting interface (such as the motion detection interface), select Record and set Record Delay. When record delay is set, alarm recording continues for an extended period of time after the alarm ends. Record linkage 5.1.1.3 Snapshot Linkage The system can automatically give an alarm and takes snapshot when an alarm event occurs. Event 113