IC Realtime IPFX-D80V-IRW1 Product Manual - Page 171
Setting > Event > ANPR > Scene Set
View all IC Realtime IPFX-D80V-IRW1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 171 highlights
Preparation Select Setting > Event > Smart Plan, and then enable ANPR. Procedures Select Setting > Event > ANPR > Scene Set. The Scene Set interface is displayed. See Figure 5-54. Scene set (ANPR) Select Enable to enable the plate no. recognition function. Click Draw after Detect Region to draw a detection area. See the blue box in Figure 5-63. To draw the detection area again, click Clear at the right side. Click Detection Line to draw an intelligent detection line for triggering snapshot. See the yellow line in Figure 5-63. Requirement for drawing a detection line: When the detection line is triggered, the plate no. in the snapshot is clear. To draw the detection area again, click Clear at the right side. Click Plate No., and homocentric rectangular frames are displayed. After a snapshot is taken, adjust the camera and the rectangular box to make the actual plate no. in the frames to get a better detection effect. Set parameters. See Table 5-18. Parameter Non-Motor Vehicle Detection Table 5-18 Description of scene set parameters (ANPR) Description Select Non-Motor Vehicle Detection to detect non-motor vehicles in the detection area. Event 163