IC Realtime IPFX-D80V-IRW1 Product Manual - Page 129
Setting Panoramic Calibration
View all IC Realtime IPFX-D80V-IRW1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
Setting Panoramic Calibration The device has calibration parameters by default. See this section for manual calibration in case of poor using effect of default setting. Before manually calibrate a channel, clear all default calibration parameters. Channel 1 is PTZ camera. You should calibrate the scene coordinates of Channel 1 and other channels. Take calibration Channel 2 as an example. Select Setting > Event > Panoramic Calibration. The Panoramic Calibration interface is displayed. See Figure 5-13. Panoramic calibration Select channel 2, and then select a calibration number under the video images in turns (See Figure 5-14) to add calibration points to the corresponding video images. Take Calibrate1 as an example. Selecting a calibration number 1) Adjust the dome PTZ angle of channel 1 by the PTZ control interface to rotate the center of channel 1 to a position aligned with the green point in Calibrate1 image, and then click . Event 121