IC Realtime IPFX-D80V-IRW1 Product Manual - Page 88

Parameter Read-only Username Description Set the read-only username accessing device, and it is public by default. Read/Write Username You can enter number, letter, and underline to form the name. Set the read/write username access device, and it is public by default. Authentication Type Authentication Password Encryption Type Encryption Password Click Save. You can enter number, letter, and underline to form the name. You can select from MD5 and SHA. The default type is MD5. It should be no less than 8 digits. The default is CBC-DES. It should be no less than 8 digits. Verification View device configuration through Step 1 Run MIB Builder and MG-SOFT MIB Browser. Compile the two MIB files with MIB Builder. Load the generated modules with MG-SOFT MIB Browser. Enter the IP address of the device you need to manage in the MG-SOFT MIB Browser, and then select version to search. Unfold all the tree lists displayed in the MG-SOFT MIB Browser, and then you can view the configuration information, video channel amount, audio channel amount, and software version. Use PC with Windows OS and disable SNMP Trap service. The MG-SOFT MIB Browser will display prompt when alarm is triggered. 4.6.8 Bonjour Enable this function, and the OS and clients that support Bonjour would find the camera automatically. You can have quick visit to the camera with Safari browser. Bonjour is enabled by default. Procedures Step 1 Select Setting > Network > Bonjour. The Bonjour interface is displayed. See Figure 4-76. Basic Configuration 80