IC Realtime IPFX-D80V-IRW1 Product Manual - Page 127
Enabling Alarm Track
View all IC Realtime IPFX-D80V-IRW1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
Smart track Select scene number under the video images in turns (See Figure 5-11) to add calibration points to the video images of the corresponding scene. Scene number 1 to 4 are four scenes divided by spliced image with at least four calibration points for each scene. Selecting scene number Add calibration points by the procedure as below. 1) Adjust the video image of dome to a position aligned with the panoramic image, and then click . Calibration box is displayed in the images of dome and panoramic camera. 2) Drag the calibration box to a proper position, and click to save one pair of calibration boxes. After the calibration record is saved, the calibration box is displayed in yellow. Click Save. 5.2.2 Enabling Alarm Track The Alarm Track is disabled by default. Smart track is enabled only after Alarm Track is enabled and intelligent rule is set for panoramic camera. Smart Track is supported only when rules of crowd map, cross region and tripwire intrusion are triggered. See "5.8 Setting " and "5.9 Setting Crowd Map." Select Setting > Event > Smart Track > Alarm Track. The Alarm Track interface is displayed. See Figure 5-12. Event 119