IC Realtime IPFX-D80V-IRW1 Product Manual - Page 40
PTZ Function
View all IC Realtime IPFX-D80V-IRW1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Zoom, focus and iris: Click or to adjust zoom, focus and iris. 4.3.3.2 PTZ Function Select the PTZ function from the drop-down list to call the corresponding functions, including Scan, Preset, Tour, Pattern, Pan, Go to, Assistant and Light Wiper. See Figure 4-22. For details, see Table 4-6. Before calling PTZ function, see "4.3.2 Configuring PTZ Function" to configure PZT function. If an external PTZ is connected to the camera, the configurations are valid only when the corresponding functions are available on the external PTZ. The range of PTZ function (such as preset and tour) depends on the PTZ protocol. PTZ function Parameter Scan Preset Tour Pattern Pan Go to Assistant Light/Wiper Table 4-6 PTZ Description of function Description Set scan number and click Start, the camera moves horizontally on a certain speed between the set left and right limit. Click Stop to stop scanning. Set preset number and click Go to, the camera quickly positions the corresponding preset. Set tour number and click Start, the camera moves in the older of the set presets. Click Stop to stop touring. Set pattern number and click Start, the camera moves continuously according to the operation records. Click Stop to stop patterning. Operation records include the information of manual operation, focus and zoom. Click Start, and the camera rotates 360°at a certain speed in horizontal direction. Set horizontal angle, vertical angle, and zoom. Click Go to to position a certain point accurately. Set assistant number and click Aux On to enable the corresponding assistant function, and then you can adjust the camera. Click Aux On to disable the corresponding assistant function Set the light or wiper of the camera. Click Enable to enable light/wiper function. Click Disable to disable light/wiper function. Basic Configuration 32