IC Realtime IPFX-D80V-IRW1 Product Manual - Page 140
Setting > Event > IVS > Global Setup
View all IC Realtime IPFX-D80V-IRW1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 140 highlights
Rule Crowd gathering Loitering detection Description When the crowd gathers or the crowd density is large, the system performs alarm linkage. When the target loiters over the shortest alarm time, the system performs alarm linkage. After alarm is triggered, if the target stay in the area within the time interval of alarm, then alarm will be triggered again. Applicable Scene Scenes with medium or long distance, such as outdoor plaza, government entrance, station entrance and exit. It is not suitable for short-distance view analysis. Scenes such as park and hall. Preparation Select Setting > Event > Smart Plan, and enable IVS. To set Fast Moving rule, first select Setting > Event > IVS > Global Setup to finish global configuration. Procedures This section takes tripwire for example to introduce rule configuration of IVS analysis. Go to the Rule Config interface, and the PTZ lock is automatically on. The locking time is 180 seconds. You can only manually control PTZ during the locking time. To manually unlock PTZ, click Unlock at lower left corner of the Rule Config interface. To relock PTZ, click it again after unlocking. Select Setting > Event > IVS > Rule Config. The Rule Config interface is displayed. Click , double-click the name, and select Tripwire in the Type drop-down list. See Figure 5-22. Event 132