Icom IC-7610 Instruction Manual advanced - Page 16
Delta TX function, Delta TX monitor function - noise reduction
View all Icom IC-7610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
2. ADVANCED OPERATIONS ∂TX function The ∂TX function shifts the transmit frequency up to ±9.99 kHz without shifting the receive frequency. 1. Push TX . ••The ∂TX function turns ON. LPushing TX turns the ∂TX function ON or OFF. LWhile using the Fine Tuning function (See Basic manual section 3), the ∂TX frequency is displayed in 4 digits, instead of 3. ∂TX frequency 2. Rotate RIT/ TX to set the ∂TX frequency to match the receiving station's frequency. Set the ∂TX frequency. DD∂TX monitor function When the ∂TX function is ON, you can directly monitor the operating frequency by holding down XFC . While holding down XFC . LW hile monitoring, the TX/RX indicator lights green and the Noise Reduction, Notch Filter and Twin PBT settings are cleared. LTo reset the ∂TX frequency to "0.00," hold down CLEAR for 1 second. LYou can add the frequency shift to the operating frequency by holding down TX for 1 second. 3. To turn OFF the ∂TX function, push TX . 12