Icom IC-7610 Instruction Manual advanced - Page 93

Touch screen calibration function, TIP: When the touch screen is not accurate,

Get Icom IC-7610 PDF manuals and user guides View all Icom IC-7610 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 93 highlights

12. MAINTENANCE (ADVANCED) Touch screen calibration function When no screen action occurs, or a different function is activated after touching the screen, the touched point and the detected point may be different. In that case, the Touch screen calibration function helps to correct the touch screen sensing accuracy. 1. Display the OTHERS screen. MENU » Set > Others 2. Touch "Touch Screen Calibration." ••A dot appears on the screen. TIP: When the touch screen is not accurate, and you cannot access the OTHERS screen. Do the following steps to display the "Touch Screen Calibration" screen. 1. Turn OFF the transceiver. 2. While holding down MENU and EXIT , push POWER to display the "Touch Screen Calibration" screen. 3. Repeat step 3 and 4 on the left column. 4. Touch the frequency readout or a key on the touch screen to confirm that the touch screen is working correctly. 3. Touch the dot that is displayed on the screen. ••A new dot appears in another position. Touch the displayed dot 4. Repeat step 3. L When the calibration is complete, the transceiver returns to the OTHERS screen. 87

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
87
12. MAINTENANCE (ADVANCED)
Touch screen calibration function
When no screen action occurs, or a different function
is activated after touching the screen, the touched
point and the detected point may be different.
In that case, the Touch screen calibration function
helps to correct the touch screen sensing accuracy.
1.
Display the OTHERS screen.
TIP: When the touch screen is not accurate, and
you cannot access the OTHERS screen.
Do the following steps to display the “Touch Screen
Calibration” screen.
1.
Turn OFF the transceiver.
2. While holding down
MENU
and
EXIT
,
push
POWER
to display the “Touch Screen
Calibration” screen.
3.
Repeat step 3 and 4 on the left column.
4.
Touch the frequency readout or a key on the
touch screen to confirm that the touch screen is
working correctly.
MENU
»
Set >
Others
2. Touch “Touch Screen Calibration.”
• A dot appears on the screen.
3.
Touch the dot that is displayed on the screen.
• A new dot appears in another position.
Touch the displayed dot
4. Repeat step 3.
L
When the calibration is complete, the transceiver
returns to the OTHERS screen.