Icom IC-7610 Instruction Manual advanced - Page 92
Circuitry fuse, Replacing fuse Continued
View all Icom IC-7610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
12. MAINTENANCE (ADVANCED) Replacing fuse (Continued) DDCircuitry fuse 1. Unscrew 2 screws to remove the carrying handle, if attached. 4. Replace the circuitry fuse as shown below. CAUTION: When you remove a fuse, use longnose pliers to protect your fingers and the fuse holders. ATC 5 A fuse Carrying handle 2. Remove the 10 top cover screws, then remove the cover. 5. Replace the removed parts. 3. Remove the 15 shield screws, then remove the shield cover. Shield cover 86
86
12. MAINTENANCE (ADVANCED)
Replacing fuse (Continued)
Carrying handle
Shield cover
D
Circuitry fuse
1.
Unscrew 2 screws to remove the carrying handle,
if attached.
2.
Remove the 10 top cover screws, then remove
the cover.
3.
Remove the 15 shield screws, then remove the
shield cover.
4.
Replace the circuitry fuse as shown below.
ATC 5 A fuse
5. Replace the removed parts.
CAUTION:
When you remove a fuse, use longnose
pliers to protect your fingers and the fuse holders.