Icom IC-7610 Instruction Manual advanced - Page 77
SCAN screen, TIP: How to reset to the default settings, SCAN Resume
View all Icom IC-7610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
8. SCANS SCAN screen To display the SCAN screen, push MENU , and then touch [SCAN]. SCAN SET screen 1. Display the SCAN screen. MENU » SCAN 2. Touch [SET]. Main band: VFO mode 3. Touch an item to set. (Example: SCAN Speed) Main band: Memory mode LTo select the VFO mode or Memory mode, push QUICK and touch "VFO/MEMORY," and then on the VFO/MEMORY screen, touch [VFO] or [MEMORY]. Key Action PROG Starts or cancels the Programmed scan. MEMO Starts or cancels the Memory scan. ∂F Starts or cancels the ∂F scan While Programmed scanning, touch to switch to the Fine Programmed scan. FINE While ∂F scanning, touch to switch to the Fine ∂F scan. LIn the Memory mode, this key is displayed when a ∂F scan is started. Touch to select the ∂F span between ±5 kHz, ∂F SPAN ±10 kHz, ±20 kHz, ±50 kHz, ±100 kHz, ±500 kHz, and ±1 MHz. RECALL Touch 1 second Recalls the frequency that before starting the scan in mode. was set the VFO SET Displays the SCAN SET screen. SELECT Touch Selects a Memory channel to set as a Select Memory channel. "1," "2," "3," and "(no icon)" are alternately displayed. SEL No. Touch Displays the SELECT ALL CLEAR 1 second screen. Selects the Select scan number for the Select Memory scan. Each time you touch [SEL No.], "1," "2," "3," and "1,2,3" are alternately displayed. 4. Touch an option. (Example: Slow) 5. To close the SCAN SET screen, push EXIT . SCAN Speed (Default: Fast) Set the desired scan speed to slow or fast. ••Slow: Scan speed is slow. ••Fast: Scan speed is fast. SCAN Resume (Default: ON) Set the Scan Resume function to ON or OFF. ••OFF: When a signal is detected, cancels the scan. ••ON: When a signal is detected, scan pauses for 10 seconds, then resumes. Two seconds after the signal disappears, the scan resumes. TIP: How to reset to the default settings Touching an item or its option for 1 second displays the Quick menu, and then touch "Default" to reset to the default setting. 71