Icom IC-7610 Instruction Manual advanced - Page 53

RECORDER SET screen, Recorder Set, REC Mode, TX REC Audio, RX REC Condition, File Split, PTT Auto REC

Get Icom IC-7610 PDF manuals and user guides View all Icom IC-7610 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 53 highlights

4. VOICE RECORDER FUNCTIONS RECORDER SET screen You can change the recorder settings on this screen. MENU » RECORD > Recorder Set REC Mode (Default: TX&RX) Selects the recording mode to record a QSO audio. ••TX&RX: Records both the transmit and receive audio. ••RX Only: Records only the received audio. TX REC Audio (Default: Direct) Selects the recording audio to transmit. ••Direct: Records the microphone audio. ••Monitor: Records the TX monitor audio. RX REC Condition (Default: Squelch Auto) Selects the recording condition for receive. ••Always: Records even if no signal is received. ••Squelch Auto: Records only when the squelch opens. (The recording will be paused when the squelch closes while recording.) File Split (Default: ON) Turns the File Split function ON or OFF. ••OFF: The audio is continuously recorded into the file even if you switch between transmit and receive or the squelch status changes between open and closed. When the recording file's size becomes 2 GB, the transceiver continues to record, but to a new file. ••ON: While recording, and if you switch between transmit and receive, or the squelch status changes between open and closed, a new file is automatically created in the same folder, and the audio is saved into the new one. PTT Auto REC (Default: OFF) Turns the PTT Automatic Recording function ON or OFF. ••OFF: The recording does not start, even if a signal is transmitted. ••ON: The recording automatically starts when a signal is transmitted. The recording will stop when: ••10 seconds has passed without transmission after the last transmission. ••10 minutes has passed with no signal after the last transmission. - If you receive a signal within 10 seconds after the last transmission, the received audio is also recorded. - If you receive another signal within 10 seconds after the last reception, the received audio is also recorded. ••10 minutes has past while operating with the squelch is open in the SSB, CW, RTTY, or AM mode. ••The frequency or operating mode is changed. ••The operating method (V/M, M-CH, Band Stacking Register, and so on) is changed. PRE-REC for PTT Auto REC (Default: 10sec) Selects whether or not record the audio that is received before the PTT Automatic Recording function is activated. ••OFF: Does not record the audio. ••5sec/10sec/15sec: Records the audio that is previously received in this set period of time. TIP: How to reset to the default setting Touching the item or its option for 1 second displays the Quick menu, and then touch "Default" to reset to the default setting. 47

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
47
4. VOICE RECORDER FUNCTIONS
You can change the recorder settings on this screen.
MENU
»
RECORD >
Recorder Set
REC Mode
(Default: TX&RX)
Selects the recording mode to record a QSO audio.
• TX&RX:
Records both the transmit and receive
audio.
• RX Only: Records only the received audio.
TX REC Audio
(Default: Direct)
Selects the recording audio to transmit.
• Direct:
Records the microphone audio.
• Monitor: Records the TX monitor audio.
RX REC Condition
(Default: Squelch Auto)
Selects the recording condition for receive.
• Always:
Records even if no signal is received.
• Squelch Auto:
Records only when the squelch
opens.
(The recording will be paused when
the squelch closes while recording.)
File Split
(Default: ON)
Turns the File Split function ON or OFF.
• OFF:
The audio is continuously recorded into
the file even if you switch between transmit
and receive or the squelch status changes
between open and closed.
When the recording file’s size becomes
2 GB, the transceiver continues to record, but
to a new file.
• ON:
While recording, and if you switch between
transmit and receive, or the squelch status
changes between open and closed, a new file
is automatically created in the same folder,
and the audio is saved into the new one.
PTT Auto REC
(Default: OFF)
Turns the PTT Automatic Recording function ON or
OFF.
• OFF:
The recording does not start, even if a signal
is transmitted.
• ON:
The recording automatically starts when a
signal is transmitted.
The recording will stop when:
• 10 seconds has passed without transmission after the last
transmission.
• 10 minutes has passed with no signal after the last
transmission.
- If you receive a signal within 10 seconds after the last
transmission, the received audio is also recorded.
- If you receive another signal within 10 seconds after the
last reception, the received audio is also recorded.
• 10 minutes has past while operating with the squelch is
open in the SSB, CW, RTTY, or AM mode.
• The frequency or operating mode is changed.
•
The operating method (V/M, M-CH, Band Stacking
Register, and so on) is changed.
PRE-REC for PTT Auto REC
(Default: 10sec)
Selects whether or not record the audio that is
received
before the PTT Automatic Recording
function is activated.
• OFF:
Does not record the audio.
• 5sec/10sec/15sec:
Records the audio that is previously received
in this set period of time.
TIP: How to reset to the default setting
Touching the item or its option for 1 second displays
the Quick menu, and then touch “Default” to reset to
the default setting.
RECORDER SET screen