Icom IC-7610 Instruction Manual advanced - Page 67
Entering memory channel contents
View all Icom IC-7610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
7. MEMORY OPERATION Entering memory channel contents The operating frequency, operating mode, IF filter bandwidth, and so on can be entered to each memory channel. (p. 60) NOTE: New content you enter will overwrite any content already in the selected memory. 1. Select the Main band or Sub band. (Example: Main band) 2. Push QUICK , and then touch "VFO/MEMORY" to select the VFO mode. 3. Set the frequency, operating mode, and other parameters you want to save in memory. 4. Rotate MULTI to select the Memory channel to enter the contents set in step 3. (Example: 2) LYou cannot select the channel number when the Mini scope screen, expanded screen or dual screen is displayed. LIf is displayed next to the selected memory channel number, it is a blank channel, meaning that no contents are entered in that channel. The channel is blank. 5. Push QUICK , and then touch "VFO/MEMORY." 6. Touch [MW] for 1 second. ••The contents are entered in the selected Memory channel. The entered contents are displayed. LTo enter another channel with the same operating mode and settings, but on a different frequency, repeat steps 4 ~ 6 after changing the frequency. 7. To close the VFO/MEMORY screen, push EXIT . To edit the Memory channel contents: 1. Select the Memory channel to edit. 2. Change the frequency and other parameters in the Memory mode. 3. Push QUICK , and then touch "VFO/MEMORY." 4. Touch [MW] for 1 second to overwrite onto the selected Memory channel. 61