Icom IC-7610 Instruction Manual advanced - Page 76
Memory scan operation, Scan types, Preparation
View all Icom IC-7610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
8. SCANS Scan types Scan types VFO SCAN Programmed scan Fine Programmed scan MEMORY SCAN Memory scan Select Memory scan ∂F SCAN Fine ∂F scan Operation (Scan function is enabled in the Main band) Used to detect a signal by automatically changing the frequency in the VFO mode. Repeatedly scans between two Scan Edge frequencies. The edge frequencies are programmable, and are preset in P1 and P2 as the default. (pp. 61, 64) If the squelch opens while scanning, the tuning step changes to 10 Hz. This reduces the scan speed, but the transceiver keeps scanning. Used to detect a signal by automatically scanning the memories in the Memory mode. Repeatedly scans all entered Memory channels. Repeatedly scans all or one of 3 select Memory channels. Repeatedly scans within the ∂F span area. The scan starts from the center frequency. (p. 71) If the squelch opens while ∂F spanning, the tuning step changes to 10 Hz. This reduces the scan speed, but the transceiver keeps scanning. Preparation DDSquelch status Scans work with the Main band's squelch status. Be sure to adjust the squelch level according to your operating environment. LNormally, set AF RF/SQL to the point where noise disappears, and the TX/RX indicator goes OFF. When the scan starts with the squelch open: ••For a Programmed scan When the tuning step is 1 kHz or less, the scan continues until it is manually stopped- it does not pause* even if signals are detected. *The scan pauses when the squelch is closed and then opened. The scan resumes after 10 seconds has passed when the Scan Resume function is ON. It is cancelled when the function is OFF. When the tuning step is 5 kHz or more, the scan pauses on each step when the Scan Resume function is ON. It does not pause when the function is OFF. ••For a Memory scan The scan pauses on each channel when the Scan Resume function is ON. The scan does not pause when the function is OFF. When the scan starts with the squelch closed: The scan stops when a signal is detected, regardless of the tuning step. ••When the Scan Resume function is ON, the scan pauses for 10 seconds after detecting a signal, then resumes 2 seconds after the signal disappears. 70