Icom IC-7610 Instruction Manual advanced - Page 59
Repeatedly transmitting, Adjusting the output level, InNormaAion, VOICE - mods
View all Icom IC-7610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
5. VOICE TX MEMORY OPERATION Transmitting a Voice memory content (Continued) DDRepeatedly transmitting 1. Display the VOICE TX screen. MENU » VOICE 2. Touch a Voice TX memory key [T1] ~ [T8] for 1 second. ••Repeatedly transmits the recorded content. DDAdjusting the output level Adjust the Voice TX memory level. 1. Display the VOICE TX screen. MENU » VOICE 2. Touch [TX LEVEL]. Transmitting The SD card indicator located next to the card slot blinks while transmitting. 3. Touch any Voice memory key other than [T4] or [T8]. ([T1] ~ [T3] or [T5] ~ [T7]) ••The transceiver automatically transmits. LTo adjust the Transmit voice level for [T4] and [T8], reverse steps 2 and 3. Repeat icon The transmission's remaining time Rotate MAIN DIAL to adjust. Touch for 1 second to reset to the default setting LLInformatio ••The recorded content is repeatedly transmitted for 10 minutes, unless you manually stop transmission by touching the selected memory. ••You can set the pause interval between the repeated transmissions in the "Repeat Time" item on the VOICE TX SET screen. During this interval, the transceiver returns to receive. (p. 54) ••After 10 minutes have passed, and all of the recorded content in the memory is transmitted, the transceiver automatically returns to receive. ••When a signal is received in the interval between transmissions, the transceiver pauses the next transmission until the signal disappears. However, if the squelch is set to open, the transceiver repeatedly transmits after the repeat interval time expires, even signals are received. 3. To close the VOICE TX screen, push EXIT . 4. While transmitting, rotate MAIN DIAL to adjust the transmit voice level. LAdjusting the level too high may result in over modulation, and transmit signal distortion. 5. To close the VOICE TX screen, push EXIT several times. TIP: If the "DATA OFF MOD" is set to "ACC," "USB" or "LAN," Voice TX memories can not be transmitted. MENU » SET > Connectors > MOD Input > DATA OFF MOD 53