Icom IC-7610 Instruction Manual advanced - Page 20
Keyer set menu (CW-KEY SET), Setting example, CW-KEY SET, Side Tone Level, Keyer Repeat time - rear panel
View all Icom IC-7610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
2. ADVANCED OPERATIONS Operating CW (ADVANCED) (Continued) DDKeyer set menu (CW-KEY SET) In this menu, you can set the memory keyer repeat time, dash weight, paddle specifications, key type, and so on. Setting example 1. Display the CW-KEY SET menu in the CW mode. MENU » KEYER > EDIT/SET > CW-KEY SET 2. Select the setting item. (Example: Side Tone Level) Dot/Dash Ratio (Default: 1:1:3.0) Set the dot/dash ratio. ••Set to between 1:1:2.8 ~ 1:1:4.5 in 0.1 steps. Keying weight example: Morse code "K" Default: 1:1:3 Dot Dash 11 3 Dash Setting range 1:1:2.8 to 1:1:4.5 1 1 2.8ʙ4.5 Setting range Space 3. Adjust the Side Tone Level. (Example: 80%) Rise Time (Default: 4ms) Set the rise time of the transmitted CW envelope. ••Set to 2, 4, 6 or 8 milliseconds. Key action TX RX TX output power Set TX output power 0 Rise time Time 4. To close the CW-KEY SET screen, push EXIT several times. Paddle Polarity (Default: Normal) Set the paddle dot-dash polarity to Normal or Reverse. ••Normal: Right = dash, Left = dot ••Reverse: Right = dot, Left = dash Side Tone Level Adjust the CW side tone output level. ••Adjust to between 0 ~ 100%. (Default: 50%) Side Tone Level Limit (Default: ON) Turn the CW side tone level limit ON or OFF. This disables the CW side tone when you rotate AF RF/SQL (inner) above the side tone level. Keyer Repeat time (Default: 2sec) Set the time between Memory keyer transmissions. ••Set to between 1 ~ 60 seconds. LAfter transmitting a Memory keyer, the transmission is repeated after the set time period. L is displayed even between transmissions. Key Type (Default: ELEC-KEY) Set the key type for the [KEY] connector on the rear panel. ••Set to Straight, Bug or Paddle. MIC Up/Down Keyer (Default: OFF) Set the microphone [UP]/[DN] keys to use as a CW key. ••ON: ••OFF: Use the [UP]/[DN] keys as a CW key. Do not use the [UP]/[DN] keys as a CW key. LThe [UP]/[DN] keys do not work as a "squeeze key." LWhen "ON" is selected, you cannot change the frequency and the Memory channels using the [UP]/[DN] keys. TIP: How to reset to the default setting Touching the item or its option for 1 second displays the Quick menu, and then touch "Default" to reset to the default setting. 16