Icom IC-7610 Instruction Manual advanced - Page 87
Measuring SWR, Before transmitting
View all Icom IC-7610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
11. OTHER FUNCTIONS Measuring SWR The transceiver has a high-performance SWR meter. This meter displays a stable measurement in real time, even if the transmit output power varies frequently. You can measure the SWR of an antenna itself through the internal antenna tuner. 1. Select the RTTY mode. 2. Set the frequency band for the antenna. 3. Touch the meter indicator several times to display the SWR meter. LYou can also display the SWR on the Multi-function meter by touching the meter indicator for 1 second. SWR meter display Before transmitting, monitor the operating frequency to make sure you will not cause interference to other stations on the same frequency. 6. Hold down [PTT] (or push TRANSMIT ) to transmit. The best match is within this range. (1.5 or less) 4. Select the antenna connector that the antenna that you want to measure is connected to. 5. Push MULTI to adjust the RF POWER to more than 30 W in the Multi-function menu. LIf the SWR meter indicates 1.5 or less, the antenna is matched. LIf the measured SWR is more than 1.5:1, you need to match the antenna with the transceiver. 7. After reading the SWR, release [PTT] (or push TRANSMIT ) to return to receive. 81