Icom IC-7610 Instruction Manual advanced - Page 78
CLOCK AND TIMERS (ADVANCED), NTP function, Using the NTP Time Synchronize function
View all Icom IC-7610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
8. SCANS Programmed scan Programmed scan and Fine Programmed scan Scan edge P1 or P2 Scan edge P2 or P1 Scan Jump Repeatedly scans between two Scan Edge frequencies. The edge frequencies are preset in P1 and P2 as the default. (P1: 0.500000 MHz / P2: 29.999999 MHz) LTo change the P1 and P2 Scan Edge Memory channels, see "Entering memory channel contents" (p. 61) for details. LIf the same frequencies are entered into P1 and P2, the Programmed scan does not start. LThe Fine Programmed scan is most effective in the SSB, CW, and RTTY modes. DDProgrammed scan operation 1. Select the VFO mode in the Main band. 2. Select the operating mode (example: USB), tuning step (1 kHz). 3. Display the SCAN screen. MENU » SCAN 4. Touch [PROG] to start the Programmed scan. L"PROGRAM SCAN" blinks while scanning. LYou can change the operating mode and the tuning step while scanning. Blinks Frequency before scan 5. Touch [FINE] to switch to the Fine Programmed scan. LWhile scanning, "FINE PROGRAM SCAN" blinks instead of "PROGRAM SCAN." LTouch [FINE] again to return to the Programmed scan. Blinks 6. To close the SCAN screen, push EXIT several times. 72