Icom IC-7610 Instruction Manual advanced - Page 38
Checking the repeater input signal, Checking the repeater tone frequency - release
View all Icom IC-7610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
2. ADVANCED OPERATIONS FM repeater operation (Continued) DDSetting the repeater tone frequency (Continued) Checking the repeater tone frequency You can check the tone frequency by receiving the repeater's input frequency using the tone scan. To receive the input signals, the transceiver detects the subaudible tone frequency using the tone scan function. 1. Touch [T-SCAN]. ••The scan starts, and then stops when a matching tone frequency the same as the repeater is received. DDChecking the repeater input signal You can check whether you can directly receive another station's transmit signal or not, by listening to the repeater input frequency. LWhile receiving, hold down XFC to listen the repeater input frequency. LWhile listening, the TX/RX indicator lights green, and then the Noise Reduction and Notch Filter settings are cancelled. XFC Blinks while scanning 2. To close the TONE FREQUENCY screen, push EXIT . Quick Split function ON While holding down XFC . Release XFC . Another station's transmit frequency 34