Icom IC-7610 Instruction Manual advanced - Page 46
ADVANCED SCOPE OPERATION, Dual Scope Auto Select
View all Icom IC-7610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
3. ADVANCED SCOPE OPERATION SCOPE SET screen (Continued) Waveform Color (Current) (Default: (R) 217 (G) 241 (B) 247) Set the waveform color for the currently received signals. LTouch and select the R (Red), G (Green) or B (Blue) scale, and then rotate MULTI to adjust the level from 0 to 255. LThe color is displayed in the box above the RGB scale. Waveform Color (Line) (Default: (R) 70 (G) 30 (B) 0) Set the waveform outline color for the currently received signals. LTouch and select the R (Red), G (Green) or B (Blue) scale, and then rotate MULTI to adjust the level from 0 to 255. LThe color is displayed in the box above the RGB scale. Waveform Color (Max Hold) (Default: (R) 58 (G) 110 (B) 147) Set the waveform color for the received signals maximum level. LTouch and select the R (Red), G (Green) or B (Blue) scale, and then rotate MULTI to adjust the level from 0 to 255. LThe color is displayed in the box above the RGB scale. Waterfall Display (Default: ON) Turn the Water fall display ON or OFF for the normal scope or Mini scope screens. LOn the Expanded scope screen, the Waterfall is always displayed. • OFF: Turns OFF the Waterfall display. • ON: Turns ON the Waterfall display. Waterfall Speed (Default: Mid) Select the Waterfall speed. • Slow: Sets the waterfall speed to Slow. • Mid: Sets the waterfall speed to Mid. • Fast: Sets the waterfall speed to Fast. Waterfall Size (Expand Screen) (Default: Mid) Select the Waterfall height in the Expand scope screen. • Small: The same height as the Normal scope screen, only the FFT scope expands. • Mid: The Waterfall height expands at the same ratio as the FFT scope. • Large: Only the Waterfall height expands. Waterfall Peak Color Level (Default: Grid 10) Select the signal level that the Waterfall displays a peak color. Higher signal levels are Red, Yellow, Green, Lightblue, Blue and Black, in that order. • Selection: Grid 1 ~ Grid 10 Waterfall Marker Auto-hide (Default: ON) Set the Waterfall Marker Auto-hide function to ON or OFF. • OFF: The marker in the Waterfall zone stays ON. • ON: The marker in the Waterfall zone is hidden 2 seconds after it stops in place. Dual Scope Type (Default: Over/Under) When the Dual scope is selected, select the Main and Sub scope layout. • Over/Under: Displays the Main scope over the Sub scope. • Side by Side: D isplays the Main and Sub scopes side by side. Dual Scope Auto Select (Default: ON) When the Dual scope is selected, by selecting the band (MAIN or SUB) simultaneously switches the Main or Sub scope. • OFF: The Main scope and Sub scope are not switched by selecting the Main band or Sub band. • ON: The Main scope and Sub scope are switched by selecting the Main band or Sub band. Continued on the next page 40