Icom IC-7610 Instruction Manual advanced - Page 97
Updating the firmware Continued, After you read and agree with all the precautions
View all Icom IC-7610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
13. UPDATING THE FIRMWARE Updating the firmware (Continued) 6. After you read and agree with all the precautions, touch [YES] for 1 second. ••The updating starts. 7. Follow the instructions on the transceiver screen. L The IC-7610 reads the firmware file from the SD card or USB flash drive and writes it to the main CPU, sub CPU, front CPU, and FPGA. L Downloading and loading status are displayed in the dialogs. 8. When the update is completed, "Firmware updating has completed." is displayed in the dialog. ••The IC-7610 will automatically restart. L After the updating finishes, the operating screen is displayed. 91
91
13. UPDATING THE FIRMWARE
Updating the firmware (Continued)
7.
Follow the instructions on the transceiver screen.
L
The IC-7610 reads the firmware file from the SD
card or USB flash drive and writes it to the main
CPU, sub CPU, front CPU, and FPGA.
L
Downloading and loading status are displayed in the
dialogs.
8.
When the update is completed, “Firmware
updating has completed.” is displayed in the
dialog.
•
The IC-7610 will automatically restart.
L
After the updating finishes, the operating screen is
displayed.
6.
After you read and agree with all the precautions,
touch [YES] for 1 second.
•
The updating starts.