Icom IC-7610 Instruction Manual advanced - Page 42
ADVANCED SCOPE OPERATION, Spectrum Scope screen, Center mode, Fixed mode
View all Icom IC-7610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
3. ADVANCED SCOPE OPERATION Spectrum Scope screen DDSetting the Center Mode span Displays signals around the operating frequency within the selected span. The operating frequency is always displayed in the center of the screen. 1. Display the SPECTRUM SCOPE screen. MENU » SCOPE 2. Touch [CENT/FIX] to select the Center mode. LTouch [CENT/FIX] to toggle between the Center and Fixed modes. 3. Touch [SPAN] several times until the desired scope span is selected. ••Selectable span: ±2.5, 5.0, 10, 25, 50, 100, 250 and 500 kHz Example: Setting for ±2.5 kHz span -2.5 kHz Center mode is selected +2.5 kHz DDSetting the Fixed Mode range Displays signals within a specified frequency range. The selected frequency band activity can easily be observed using this mode. Three Fixed Edge bands can be set for each amateur frequency band covered by the transceiver. 1. Display the SPECTRUM SCOPE screen. MENU » SCOPE 2. Touch [CENT/FIX] to select the Fixed mode. LTouch [CENT/FIX] to toggle between the Center and Fixed modes. 3. Touch [EDGE] several times until the desired Fixed Edge frequency band is selected. LThe fixed Edge frequencies are settable (p. 41). Fixed mode Example: 14.000 MHz is selected Example: 14.350 MHz 4. To close the SPECTRUM SCOPE screen, push EXIT . Example: 14.000 MHz Example: 14.100 MHz ">>" shows that the receive frequency is out of the fixed Edge frequency. L When the operating frequency moves outside the upper or lower Edge frequency, "" is displayed in the upper side corners of the SPECTRUM SCOPE screen. : The frequency is outside the higher edge. LWhen the frequency moves further away, "Out of Range" is displayed. 4. To close the SPECTRUM SCOPE screen, push EXIT . 36