Konica Minolta AccurioLabel 190 bizhub PRESS C71cf/AccurioLabel 190 Quick Guid - Page 110

A media feeding error occurs, HTML User's Guide, Problem, Remedy, aligning roller, media guides

Get Konica Minolta AccurioLabel 190 PDF manuals and user guides View all Konica Minolta AccurioLabel 190 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 110 highlights

5.5 A media feeding error occurs 5.5 A media feeding error occurs This section describes typical media errors and remedies for them. Take an action as shown below according to each problem. For details on other errors, refer to the HTML User's Guide. Problem If a Meandering Paper Has Occurred Paper Leans to One Side Jam code J-1714 or J-3105 is displayed A Media-Break Error Occurs A Roll End Error Occurs Remedy 1. Check the tension setting. 2. Check the positions of the media and parts such as the roller guide. 3. Clean adhesive sticking on the parts. 4. Adjust the position of the aligning roller. 5. Change the tension setting. For details, refer to page 5-17. 1. Check the tension setting. 2. Check the positions of the media and parts such as the roller guide. 3. Clean adhesive sticking on the parts. 4. Adjust the Position of the media guides 5. Adjust the position of the aligning roller. For details, refer to page 5-21. 1. Check the tension setting. 2. Check the positions of the media and parts such as the roller guide. 3. Clean adhesive sticking on the parts. 4. Clear paper jams. 5. Change the tension setting. For details, refer to the following page. • For J-1714: page 5-26 • For J-3105: page 5-28 Roll Winder RW-201 has detected a media break. Check whether the media is broken and whether media meandering or miscentering has occurred. If the media has broken, tape up the break. Roll Winder RW-101 detected roll end. Replace the media with a new one. 5-16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
5-16
5.5
A media feeding error occurs
5.5
A media feeding error occurs
This section describes typical media errors and remedies for them.
Take an action as shown below according to each problem.
For details on other errors, refer to the
HTML User's Guide
.
Problem
Remedy
If a Meandering Paper Has Oc-
curred
1. Check the tension setting.
2. Check the positions of the media and parts such as the roller guide.
3. Clean adhesive sticking on the parts.
4. Adjust the position of the
aligning roller
.
5. Change the tension setting.
For details, refer to page 5-17.
Paper Leans to One Side
1. Check the tension setting.
2. Check the positions of the media and parts such as the roller guide.
3. Clean adhesive sticking on the parts.
4. Adjust the Position of the
media guides
5. Adjust the position of the
aligning roller
.
For details, refer to page 5-21.
Jam code J-1714 or J-3105 is dis-
played
1. Check the tension setting.
2. Check the positions of the media and parts such as the roller guide.
3. Clean adhesive sticking on the parts.
4. Clear paper jams.
5. Change the tension setting.
For details, refer to the following page.
•
For J-1714: page 5-26
•
For J-3105: page 5-28
A Media-Break Error Occurs
Roll Winder RW-201
has detected a media break.
Check whether the media is broken and whether media meandering or mis-
centering has occurred.
If the media has broken, tape up the break.
A Roll End Error Occurs
Roll Winder RW-101
detected roll end.
Replace the media with a new one.